Last reviewed November 22, 2026
Review · HornBlasters

HornBlasters Conductor's Special 2HB Train Horn Kit Review (2026)

HornBlasters Conductor's Special 2HB review: Shocker XL horns, 2-gallon 6-port tank, HB-2 compressor (100% duty), 110/150 PSI, 3-5 s blasts, $849.99.

By Train Horn Hub Editorial November 10, 2026 Updated November 10, 2026
THE FILM | rubenimagery.com/midnight
Photo by RUBENIMAGES. on Unsplash
Pros
  • +Same US-made Shocker XL four-bell horn as every Conductor's Special kit
  • +HB-2 compressor rated 100% duty cycle at 100 PSI (vs 30% on the 228H)
  • +150 PSI cut-out with 50-second 110-150 PSI recovery at 13.8 V
  • +6-port tank and separate components leave room for onboard-air add-ons
  • +Lifetime horn warranty, 2 years on other components
Cons
  • −Still only 3-5 second blasts, same as the $649.99 228H
  • −No dB rating or chord frequencies on the kit page
  • −Recovery spec conflicts: 65 s in marketing copy vs 50 s in fill table
  • −Separate tank and compressor mean more wiring and plumbing work
  • −Returns may carry a 15% restocking fee

Methodology

This review aggregates publicly available information from manufacturer specifications, retailer listings, and verified user reviews. We do not perform hands-on testing. For the Conductor’s Special 2HB we used HornBlasters’ own kit page, its standalone Shocker XL horn and HB-2 compressor pages, the brand’s decibel-methodology pages, a third-party retailer listing for a price check, and the DJD Labs video the brand links. Any number that appears below comes from one of the pages in the Sources section. Last reviewed: November 10, 2026.

Quick verdict

The Conductor’s Special 2HB pairs HornBlasters’ best-selling Shocker XL four-trumpet horn with a separate 2-gallon, 6-port tank and the HB-2 compressor. The HB-2 is rated for a 100% duty cycle at 100 PSI. In our editorial opinion, the duty cycle is the reason to buy this kit over the cheaper 228H, which uses the same horn and the same 2-gallon capacity. Volume is the same on both kits, and blast length is still only 3–5 seconds. What you get for the extra $200 is a compressor that can run much harder, a tank with more ports for future add-ons, and a 150 PSI cut-out. We rate it 4.3/5. It loses points because HornBlasters doesn’t publish a decibel figure on the kit page, doesn’t list chord frequencies, and contradicts itself on recovery time.

What it is

The 2HB (part number HK-S4-2HB) is one of HornBlasters’ Shocker XL kits. All of them use the same four-bell horn and differ only in the air system. HornBlasters calls the Shocker XL its “#1 seller” and “the loudest horns we make.” The brand says the horn is US-made from fiberglass-reinforced ABS with stainless-steel internals and brass fittings. Each of the four bells mounts separately, so you can spread them around a frame rail or bumper instead of fitting one large manifold.

The air system is what sets this kit apart. The 228H uses a pre-assembled, pre-wired “air source unit.” The 2HB instead ships a standalone HornAir 2-gallon tank and a standalone HB-2 compressor, plus a 110/150 PSI pressure switch with a 40-amp relay and a stainless electric air valve. That means more wiring and plumbing for you. In return, you can put the tank and compressor in different places, and the tank’s six ports leave room for an air chuck or extra accessories later. Our tank size guide explains why port count matters on a growing build.

This kit fits owners of full-size pickups, Jeeps and SUVs who want a real train-horn sound, plan to use onboard air for more than the horn, and are comfortable running 10-gauge power wire. It’s a poor fit if you want a bolt-in box or long, sustained blasts. See the alternatives below for both cases.

Specifications

SpecValue
Part numberHK-S4-2HB
HornShocker XL, 4 individually mounted bells
Bell lengths19.50″ / 16.25″ / 14.75″ / 12.75″
Bell flare5″ (127 mm)
Horn materialHigh-impact fiberglass-reinforced ABS (stainless internals, brass fittings)
Horn weight4.5 lb (horn only)
Horn air inlet1/8″ male NPT; requires a 1/2″ port
Chord frequenciesNot disclosed
Operating (cut-out) pressure150 PSI
Restart (cut-in) pressure110 PSI
Voltage12 V DC
System max amp draw25 A
Air tankHornAir 2-gallon, 6-port
Tank dimensions17″ L × 6″ dia. × 8″ H (with legs)
Tank weight10 lb
CompressorHB-2 (AC-2), 8.75″ × 4″ × 6.6″ per kit page
Compressor duty cycle100% at 100 PSI
Compressor flow1.58 CFM at 0 PSI
Fill time, 0–150 PSI2 min 50 s (±10 s) at 13.8 V
Recovery, 110–150 PSI50 s (±5 s) at 13.8 V
Honk duration3–5 seconds per tank (brand claim)
WarrantyLifetime on horns; 2 years on all other components (manufacturer defects)
Price$849.99 (compare-at $879.99)
Horn
Shocker XL, 4 bells
Pressure
110–150 PSI
Tank
2 gal, 6-port
Compressor
HB-2, 100% @ 100 PSI
Blast
3–5 s
Price
$849.99

About the decibel number: HornBlasters’ kit page gives no dB rating. The standalone Shocker XL page says the horn comes within “a tiny 1.7 dB difference” of a real locomotive horn. The brand’s decibel-methodology page puts the Nathan AirChime K5 at 149.4 dB at 3 ft, but neither page says which horn or test distance the 1.7 dB comparison refers to. HornBlasters says it tests every horn at 3 ft and 100 ft, but it doesn’t publish the Shocker XL’s 100-ft number on these pages. Our decibels explainer covers why test distance matters.

What’s in the box

According to HornBlasters’ kit page, the 2HB includes:

  • Shocker XL train horns (four bells)
  • HornAir 2-gallon 6-port air tank
  • HB-2 air compressor with spare air filter elements
  • 110/150 PSI pressure switch with 40-amp relay
  • 1/2″ NPT “Black Widow” stainless-steel electric air valve
  • HornBlasters 200 PSI stainless liquid-filled air gauge
  • Brass NPT fittings kit, including safety valve and blow-off
  • 10 ft of 5/16″ and 17 ft of 1/2″ D.O.T.-approved air line
  • 22 ft each of red 10-gauge, grey 18-gauge and blue 18-gauge wire
  • Wiring kit with fuse holder and fuses, mounting hardware, air-line cutter, earplugs and instructions

HornBlasters’ store data lists the kit’s shipping weight at about 36 lb. Plan for that when you choose mounting points.

Pros

  • Uses the same Shocker XL horn as every Conductor’s Special kit. HornBlasters calls it its loudest horn and says it is US-made
  • The HB-2 compressor is rated for a 100% duty cycle at 100 PSI, compared with 30% for the 228H’s compressor and 25% for the 127H’s
  • 150 PSI cut-out and 50-second 110–150 PSI recovery at 13.8 V, per the published fill-rate table
  • The 6-port tank and separate components make it easier to add an air chuck or other onboard-air accessories later (editorial opinion)
  • Lifetime warranty on the horns and 2 years on other components, with a 30-day return window
  • Complete wiring and plumbing kit, including gauge, safety valve and stainless valve. HornBlasters’ storefront shows a 5.0 average from 40 customer reviews (user-report aggregation)

Cons

  • Blasts last only 3–5 seconds. That’s the same as the $649.99 228H, so the extra cost buys compressor capacity, not longer blasts
  • The kit page lists no dB rating and no chord frequencies
  • Conflicting recovery specs: the marketing text says “65-second recovery” while the fill table says 50 seconds (±5) from 110 to 150 PSI
  • Separate tank and compressor mean more wiring, plumbing and mounting work than the 228H’s pre-assembled air source
  • Small dimension differences between pages: the HB-2 is 8.75″ × 4″ × 6.6″ on the kit page and 8.54″ × 3.93″ × 6.75″ on its own page
  • Returns can carry a 15% restocking fee and need an RMA number

Alternatives

  • HornBlasters Conductor’s Special 228H ($649.99): the same Shocker XL horn on a 2-gallon tank in a pre-wired air source unit. Its compressor is rated for 30% duty at 100 PSI and fills to 145 PSI. Pick it if you want the easiest install and only plan to use the horn.
  • HornBlasters Conductor’s Special 127H ($579.99): the cheapest Conductor’s Special kit, with a 1.5-gallon tank, 90/120 PSI switching and 2–3 second blasts. Good for tight budgets and tight spaces.
  • HornBlasters Shocker XL horn only ($339.99 standalone): the right choice if you already have an onboard-air system with a free 1/2″ port. Add the HB-2 compressor separately ($199.99 standalone) if you need one.

If you want longer blasts, move up to the 5-gallon Conductor’s Special kits covered in our HornBlasters hub and our Outlaw vs Shocker vs Conductor’s Special comparison.

Install / compatibility notes

  • Power: The system draws up to 25 A, and the kit includes 22 ft of 10-gauge power wire and a 40-amp relay on the pressure switch. Run power from the battery through the supplied fuse holder, not from a tapped accessory circuit. HornBlasters’ fill rates assume 13.8 V (engine running), so expect slower recovery on battery voltage alone.
  • Mounting: The tank is 17″ long, 8″ tall on its legs and weighs 10 lb. The compressor is about 8.75″ × 4″ × 6.6″. Keep the compressor and its remote filter away from road spray and exhaust heat. Our compressor mounting guide covers common locations.
  • Horn placement: The four bells mount separately, and the longest is 19.5″. HornBlasters notes that its “6 horn upgrade” doesn’t include the extension brackets for its STDK bracket or Shocker XL mount, so plan brackets ahead if you expand.
  • Plumbing: The horn’s inlet is 1/8″ male NPT and needs a 1/2″ port. The kit supplies the 1/2″ Black Widow valve and both air-line sizes.
  • Maintenance: Drain the tank regularly (see how to drain a train horn tank) and swap the spare filter elements as needed. The 100% duty-cycle rating is at 100 PSI; working up to 150 PSI is harder on the compressor. See compressor duty cycle explained.
  • Legality: This horn is far louder than a factory horn. Check our legality guide before using it on public roads.

For a step-by-step walkthrough, see how to install a train horn, and our PSI explainer for what the 110/150 switch means in practice.

Sources


Train Horn Hub aggregates publicly available data. We do not test products in-house. All trademarks belong to their respective owners.

Verdict

Buy the 2HB if you want Shocker XL volume plus a 100%-duty compressor and a 6-port tank you can grow into for onboard air. If you only need the horn, the cheaper 228H delivers the same 3-5 second blasts with an easier install.

Frequently asked questions

Quick answers to the questions people ask most about this topic.

How loud is the HornBlasters Conductor's Special 2HB?
HornBlasters doesn't print a dB figure on the 2HB kit page. It says the Shocker XL horn is within 1.7 dB of a real locomotive horn, and its decibel-methodology page puts the Nathan K5 locomotive horn at 149.4 dB at 3 ft. HornBlasters doesn't publish a measured dB figure for the Shocker XL itself on these pages.
What is the difference between the 2HB and the 228H?
Both use the Shocker XL horn and a 2-gallon tank, and both are rated for 3-5 second blasts. The 2HB ($849.99) uses a separate 6-port tank, a 110/150 PSI switch and the HB-2 compressor rated 100% duty at 100 PSI. The 228H ($649.99) uses a pre-assembled air source unit with a 30% duty compressor that fills to 145 PSI.
How long can I honk the 2HB, and how fast does it recover?
HornBlasters says to expect 3-5 seconds of honk per tank. Its fill table lists 50 seconds (plus or minus 5) to recover from 110 to 150 PSI and 2 minutes 50 seconds for a full 0-150 PSI fill at 13.8 V. The marketing copy on the same page says 65 seconds.
What power wiring does the 2HB need?
The system draws up to 25 A at 12 V DC. The kit includes 22 ft of red 10-gauge power wire, a fuse holder with fuses and a 110/150 PSI pressure switch with a 40-amp relay, so plan a fused run straight from the battery.
What warranty comes with the Conductor's Special 2HB?
HornBlasters covers the Shocker XL horns with a lifetime manufacturer's-defect warranty and all other components for 2 years. It also offers a 30-day return window, which requires an RMA number and may carry a 15% restocking fee.